%402x.svg){kind=icon}
Ensure every door you install is safe, legal, and standards-compliant in Australia.
Whether you're a builder working on a commercial project or a contractor in the modular and portable building space, getting door compliance right is non-negotiable. Australian standards for doors— including accessibility and structural compliance — must be followed to avoid fines, liability, or costly delays.
To make things easier, we’ve put together this practical door compliance checklist for Australian builders.
Why Door Compliance Matters
Non‑compliant doors can:
- Void insurance claims
- Fail fire‑safety audits (if applicable)
- Lead to legal consequences
- Create unsafe access for occupants or workers
In Australia, AS 1428.1 (Design for access and mobility – General requirements for access – New building work) and the NCC 2022 (National Construction Code) requirements must be met under specific circumstances, particularly for personal access doors in new buildings or refurbishments where accessibility and compliance are legally required.
The Door Compliance Checklist for 2025
Check Installation Standards
- Ensure correct clearances, fitment, and operation
- Frame must align with wall structure — no warping or gaps
- Hinges, seals, and latches must be correctly fitted
Accessibility Compliance (Where Required)
- Doors must be accessible if required by code (e.g. AS1428.1)
- Confirm clear opening widths, compliant lever handles, and minimal opening force
Choose the Right Hardware
- Select hardware suited for traffic, application, and safety
- All hardware should meet NCC or relevant building standards
- Use corrosion-resistant options when installing in high-corrosive environments, such as near coastlines, pools, or wet areas. Sentry Protect is a corrosion-resistant option, and the same recommendation applies to weatherproofing and sealing.
Weatherproofing & Sealing
- Use perimeter seals for external or shed installations
- Weatherproof doors may be required in exposed locations
Documentation & Labelling (If Required)
- Provide product datasheets and install manuals
- Include warranty or compliance certificates where relevant
- Permanently label door with any required identification (if applicable)
Cyclone and Load Ratings (If Required)
- In designated regions, confirm wind-load compliance
- Use reinforced doors with tested hinges and mounting points
Fire Door Compliance (If Applicable)
Only include this section if you’re installing fire-rated doors:
- Must meet AS1905.1 and NCC certification
- Use certified fire doors with tags and matching hardware
- Keep compliance documentation and installation records